(08) 9302 1266
Product has been added to your cart.
QUOTE CART

Calibration Service and Repairs

Why Choose Our Calibration Service and Repairs

Industry Leaders Nationwide for Professional Calibration Service and Repairs

Zedflo has been a market leader in test and measurement equipment since 1982. In 2014 we established a service and repair laboratory, and in 2018 achieved NATA accreditation for compliance with ISO/IEC 17025—Calibration. Our quality and customer service policies focus on providing the very best service.

Zedflo proudly offers calibration services with uncertainty of measurement capabilities among the best in Australia. We have invested in high-performance equipment across our laboratory.
We constantly strive to give the best customer service, which clients have come to expect over our 40+ year history in test and measurement.

Our NATA accreditation is an independent testament to our attention to detail, commitment to working to international standards in quality and technical management and metrological traceability.

Calibration services
Calibration services

Our Accreditation

  • NATA Accredited Laboratory operating in accordance with ISO/IEC 17025
  • Authorised Metrel Service and Calibration Centre
  • Authorised Additel Service and Calibration Centre
Enquire Now
Calibration form

In house repair service

  • OEM backed and authorised service and repair agents for many instruments in our range.
  • That means less downtime in the event a fault or issue is found.

Quality

  • Our NATA accreditation scope has some of the best uncertainties in Australia.
  • Advice you can rely on, with 40+ years experience in the industry.

Fast & Easy

  • Standard turn around under 1 week.
  • Expediting options available (as quick as same business day).
  • Express freight options at great rates.

Why Calibrate?

The successful operation of any process depends on the accuracy of each instrument in the control loop. It is essential that sensors in a system are properly calibrated for the entire loop perform reliably. This requires suitable calibration methods to be used, trained personnel, and metrological traceability being maintained. Choosing the right calibration laboratory can be as important for lifetime accuracy and reliability of an instrument as selecting the right equipment in the first place.

Accredited Calibration:
Accredited calibration helps you objectively understand an instrument’s performance, while giving you peace of mind that the results can be trusted.

Zedflo’s NATA accredited services include:

  • A calibration certificate, bearing the NATA emblem
  • Reporting of results, both prior to and following adjustment if required
  • Free instrument adjustment to improve performance where possible
  • Method selection and statement of compliance following strict criteria

More Info On Calibration Service and Repairs

Detailed NATA Calibration Service and Repairs

Zedflo Australia, one of the best calibration companies in WA since 1982. We specialise in providing NATA-accredited calibration services for pressure and electrical equipment. Our commitment to precision and reliability ensures that your instruments perform with high levels of accuracy.

View our full accredited scope on the NATA website:
NATA scope

A basic summary of our NATA accredited scope:

Pressure:

We can calibrate virtually all pressure reading devices

  • Up to 415MPa / 60,000PSI
  • 0.009% Uncertainty capable for precision devices up to 105MPa (15,000PSI)
  • Excellent low pressure capability – 0.65Pa uncertainty on draught pressures
  • Barometers and absolute pressure transmitters with current, voltage or frequency outputs

Electrical:

DMMs, Meters, Calibrators

  • DC Voltage up to 1050V, from 5ppm uncertainty
  • DC Current up to 30A, from 20ppm uncertainty
  • AC Voltage and Current 10Hz to 100 kHz, from 0.02%
  • Resistance up to 10 GΩ, Capacitance up to 200 mF

HV Insulation and Continuity

  • Insulation Resistance up to 10GΩ, 10kV test voltage
  • MicroOhm Continuity from as low as 1μΩ at 100A test current

Frequency and Time

  • Frequency calibration up to 100 MHz on counters, meters, calibrators or testers.  From 5 μHz uncertainty
  • RCD Testers, trip time uncertainty from 0.3ms

Resistor Sets and Decade Boxes

  • Standard Resistors, Calibration Boxes,
    Insulation Test Boxes, Decade Boxes etc…
    From 10 μΩ to 10 GΩ
  • NATA Accredited Laboratory operating in accordance with ISO/IEC 17025
  • Authorised, OEM backed services
  • Fair and affordable rates
  • 120 day after repair warranty (terms and conditions apply)
  • Fast standard turnaround times, typically under 1 week
  • Expedited service options for same or next day turn around
  • Guarantee to offer professional, impartial advice for your repair or calibration with 40+ years experience in the industry

We have a few options you can choose from:

Enquiry only
  • Complete our calibration enquiry form, we will typically reply within 1 business day explaining your options moving forward and instructions on sending us your instrument.
  • For most instruments we can and will provide a calibration quote/estimate.
emailEnquire now
Mail in your device
  • Skip the enquiry. If you have a model we calibrate, you can send it straight in for inspection.
  • Print out the form, follow the instructions on the form and send the completed printed copy enclosed with the goods.
picture_as_pdfCalibration form
Walk in, in person
  • Walk in/drop in your instrument during business hours, no appointment required.
  • It’s handy for you to print and complete the below form and bring a copy with you otherwise we can ask you the relevant questions in person
picture_as_pdfCalibration form
Call us to discuss
  • You can call us during business hours to discuss your repair options on (08) 9302 1266
callCall now

Complete one of the options from ‘How to organize a calibration?’

You can send us your instrument, or drop it into us during business hours

If urgent, let us know and we can offer an expedited service for an additional fee

Once the instrument arrives we will send you a formal quotation for your approval. (or seek approval in person)

You can contact us at any time for a status update

After your approval we will perform the quoted works.

Standard turn around is 1 week.

This will vary with work loads but we are often faster than that, calibrations are typically worked on in order of receival/approval

When completed we will send you an invoice for payment.

If you are on a ‘30 day trade account’ then we will process as per your PO or agreement.

After payment is cleared (or PO is processed for account customers), we will inform you that the goods can be collected, or if you have opted for shipping we will typically dispatch same or next business day.

You can also pay in store at time of collection.

Normal business hours

Monday to Friday, 8am to 4:30pm

We are closed on public holidays

Accepted payment methods
  • Direct bank transfer
  • Card payment over the phone (Mastercard & Visa only)
  • Eftpos payment in store (Mastercard & Visa only)

We typically have a standardized pricing structure for calibrations

  • Most of the time we can provide a quote/estimate even without seeing the instrument in person.
  • Some instruments may require an inspection prior to formally quoting
  • Be aware a quote is only an estimate, the quote may need a variance after we have inspected or even begun the calibration procedure, for example if we find damage or faults with the instrument that were not expected and not within the initial scope of the job.
  • We will contact you with a revised quote before proceeding further where necessary.

We have a minimum fee of $80 +GST, this applies as a minimum inspection fee and also a minimum calibration attempt fee for any instrument processed through our facility.

  • Instruments that fail a calibration are generally still chargeable up to the full quoted price, we may at our discretion charge a lesser fee depending how much time and effort was spent working on the instrument.
  • For failed instruments if possible we may be able to offer a repair or replacement
  • Some instruments may carry a larger minimum fee, for example in cases where we need to send the instrument to a 3rd party for assessment, in these cases before moving forward we will quote an elevated minimum fee to cover the associated freight costs and 3rd party assessment fees.

Typical internal flow of a calibration

Typically, the whole calibration process is completed within 1 week.

  • This does vary and depends on various factors, but more often than not we are actually quicker.
  • Your instrument will go through various stages during a typical calibration, we are efficient at moving it between various stages in the process but sometimes delays can happen, we will inform you if we expect any kind of delay.
  • Some calibrations may be sent to a 3rd party partner or supplier, in which case they will carry a longer than our standard turnaround time. We do, however, strive to provide the very best and accurate estimate of turnaround time at time of quoting.

For expedited ‘same day’ or ‘next day’ service, Zedflo is the best calibration service to look to!

We are always busy and do have a constant stream of work in our laboratory, instruments are usually worked on in the order they are received, and then in order of confirmed approval to proceed with quote, but for a fee your instrument can jump the queue when you require a fast turn around.

The fee will vary, and is subject to availability, but as a typical guide:

  • Next business day turn around add 30% to the normal fee
  • Same day (next on bench) turn around add 50% to the normal fee

Contact us today for more information about how we can help you with your instrument calibration needs.

Pressure:

Analogue Pressure Gauge
Digital Pressure Gauges
Pressure Transmitters & Transducers
Pressure Calibrators
Pressure Switch Setting

Electrical:

Multimeters
Clamp Meters
Installation Testers
RCD Testers
Insulation Testers
Loop Impedance
Earth Testers
Process Calibrators
Loop Calibrators

Turn around:

We know rapid turn around is important, we endeavour to repair or calibrate your equipment as quickly as possible, we advise a typical lead time of 7 days but we can often turn around calibrations next business day depending on our work load.

Other Calibrations:

We can calibrate various other instruments too, it doesn’t have to be Metrel or Additel – below is a current list of products we are capable of calibrating, if you have something not on this list, please make an enquiry.

In the intricate landscape of industrial operations, the precision and reliability of measurement instruments is vital. Whether in mining, oil and gas, food, beverage manufacturing, or any other sector, the accuracy of these instruments directly impacts safety, efficiency, and compliance. At Zedflo Australia, we specialise in offering comprehensive calibration and repair services, ensuring your instruments perform optimally. Let us delve into the importance and processes of calibration service and repairs, and how Zedflo can support your operational needs.

Calibration is the process of configuring an instrument to provide accurate measurements by comparing its output with a known standard. This ensures that your instruments deliver precise readings, maintaining the integrity of your processes. Regular calibration is essential for compliance with industry standards, improving product quality, and ensuring the safety of operations.

Accurate calibration is vital for several reasons:

  1. Safety: Ensures the safe operation of equipment, preventing accidents caused by faulty readings.
  2. Compliance: Meets industry regulations and standards, such as ISO 9001, ensuring your operations are meeting quality standards. 
  3. Efficiency: Enhances the reliability and efficiency of processes, reducing downtime and improving productivity.
  4. Cost Savings: Prevents costly errors and extends the lifespan of instruments through regular maintenance.

At Zedflo Australia, we offer a broad spectrum of calibration services, covering a wide range of instruments. Our high-spec calibration laboratory, equipped with the latest technology, ensures the highest accuracy in our calibrations. We service instruments from leading brands and cater to various industries, including mining, oil and gas, and manufacturing. Our services include:

  1. Electrical Calibrations: Multimeters, clamp meters, multifunction installation testers, portable appliance testers (PAT), process and loop calibrators, loop impedance testers, RCD testers, laboratory reference meters and calibrators, insulation ters, micro-ohm / ductor / resistance meters, earth step/touch analysers, power quality analysers, EV charging station ters, transformer analysers, current clamp meters, process calibrators
  3. Pressure Calibrations: Digital and mechanical pressure gauges, calibrators, controllers, pressure modules, transmitters and transducers, manometers, DP/flow meters, hydrostatic level gauges, barometers, chart recorders
  4. Temperature calibrations (traceable only): Temperature gauges, thermometers, probes, resistance temperature detector (RTD’s), thermocouples, temperature transmitters, dry well calibrators, infrared thermometer guns, thermal imaging cameras
  5. Ultrasonic Flow Meter Calibrations (traceable only): Ensuring accurate measurement of ‘transit time’ ultrasonic flow meters.

In addition to calibration, we pride ourselves on offering consistent quality repair services to customers across Australia. Our technicians are supplied with the latest tools and high-quality spares to give you the best repairs.

Our highly trained technicians offer a wide range of services. From fiddly pump refurbishment and seal replacement to micro soldering PCB repair. no solution is beyond our reach. Our top priority is customer service, meaning your repair will get the attention it needs.

Zedflo is an authorised service and calibration centre for various brands including Additel and Metrel.

Our Repair Capabilities

  1. Electrical InstrumentRepairs: From basic mainboard and screen replacements to more complex micro soldering PCB repair at a component level.
  2. Pump servicing and repairs: Additel, East Hills, and Martel pressure pumps have various sealing components, when worn the pump may not seal or perform well, we can service and repair these pumps to keep them in prime condition.
  3. Metering Adjustments: Fine-tuning instruments to ensure precise readings.
  4. Accessory Replacements: Including leads, probes, and connectors.
  5. Preventative Maintenance: Regular inspections and maintenance to prevent future issues.

At Zedflo, we are committed to reducing your equipment downtime. Our efficient processes,ensure swift service delivery. We also offer in house OEM backed warranty and non warranty repairs  further minimising the time your equipment is out of service.

Quality and safety are at the forefront of our operations. Our calibration services are certified to ISO/IEC 17025 standards, ensuring the highest level of precision and reliability. We regularly review and improve our systems and procedures to maintain a zero-harm environment. Our technicians are highly trained with years of experience ensuring your equipment has the best care.

All services including repairs and calibrations are subject to our standard terms and conditions

View our terms and conditions

Contact Zedflo – Your Local Experts in Calibration Service and Repairs

If you need professionals to perform certified checks on your Calibration Service and Repairs by Australian national standards, turn to Zedflo.

Since 1982, we’ve built a reputation on trust and reliability, ensuring your instruments work as intended.

Remember, the key to accurate and reliable measurements lies in regular calibration and prompt repairs, services we expertly provide at Zedflo Australia. Trust in our expertise to maintain the integrity of your measurement instruments, ensuring safety, compliance, and efficiency in your operations.

Contact Us

Get in contact with us today to see how we can help. Please fill out the enquiry form below and we will get back to you as soon as possible.

Address

Opening hours

Monday to Friday: 8am to 4:30pm
We are closed on public holidays

Address and contact information

Unit 3, 115 Excellence Drive, Wangara, Western Australia, 6065
(08) 9302 1266
sales@zedflo.com.au

Business Name / ABN

Process Control Instrumentation Pty Ltd T/A Zedflo Australia
ABN 58 120 609 814

Zedflo operates an ISO17025 NATA Accredited Calibration Lab.

You can view our NATA scope here

We are able to calibrate all popular and leading brands including Additel, Fluke, Druck, Beamex, Crystal, Transmation, Wika, Metrel, Megger, AEMC and many more