Installation Tester Calibration

• NATA Accredited Laboratory operating in accordance with ISO/IEC 17025
• Authorised, OEM backed services
• Fair and affordable rates
• 120 day after repair warranty (terms and conditions apply)
• Fast standard turnaround times, typically under 1 week
• Expedited service options for same or next day turn around
• Guarantee to offer professional, impartial advice for your repair or calibration with 40+ years experience in the industry

We have a few options you can choose from:

We typically have a standardized pricing structure for calibrations

• Most of the time we can provide a quote/estimate even without seeing the instrument in person.
• Some instruments may require an inspection prior to formally quoting
• Be aware a quote is only an estimate, the quote may need a variance after we have inspected or even begun the calibration procedure, for example if we find damage or faults with the instrument that were not expected and not within the initial scope of the job.
• We will contact you with a revised quote before proceeding further where necessary.

We have a minimum fee of $80 +GST, this applies as a minimum inspection fee and also a minimum calibration attempt fee for any instrument processed through our facility.

• Instruments that fail a calibration are generally still chargeable up to the full quoted price, we may at our discretion charge a lesser fee depending how much time and effort was spent working on the instrument.
• For failed instruments if possible we may be able to offer a repair or replacement
• Some instruments may carry a larger minimum fee, for example in cases where we need to send the instrument to a 3^rd party for assessment, in these cases before moving forward we will quote an elevated minimum fee to cover the associated freight costs and 3^rd party assessment fees.

Typically, the whole calibration process is completed within 1 week.

• This does vary and depends on various factors, but more often than not we are actually quicker.
• Your instrument will go through various stages during a typical calibration, we are efficient at moving it between various stages in the process but sometimes delays can happen, we will inform you if we expect any kind of delay.
• Some calibrations may be sent to a 3^rd party partner or supplier, in which case they will carry a longer than our standard turnaround time. We do, however, strive to provide the very best and accurate estimate of turnaround time at time of quoting.

For expedited ‘same day’ or ‘next day’ service, Zedflo is the best calibration service to look to!

We are always busy and do have a constant stream of work in our laboratory, instruments are usually worked on in the order they are received, and then in order of confirmed approval to proceed with quote, but for a fee your instrument can jump the queue when you require a fast turn around.

The fee will vary, and is subject to availability, but as a typical guide:

• Next business day turn around add 30% to the normal fee
• Same day (next on bench) turn around add 50% to the normal fee

Contact us today for more information about how we can help you with your instrument calibration needs.

Pressure:

Analogue Pressure Gauge
Digital Pressure Gauges
Pressure Transmitters & Transducers
Pressure Calibrators
Pressure Switch Setting

Electrical:

Multimeters
Clamp Meters
Installation Testers
RCD Testers
Insulation Testers
Loop Impedance
Earth Testers
Process Calibrators
Loop Calibrators

Turn around:

We know rapid turn around is important, we endeavour to repair or calibrate your equipment as quickly as possible, we advise a typical lead time of 7 days but we can often turn around calibrations next business day depending on our work load.

Other Calibrations:

We can calibrate various other instruments too, it doesn’t have to be Metrel or Additel – below is a current list of products we are capable of calibrating, if you have something not on this list, please make an enquiry.